ISONEM M 35 is a cementitious special waterproofing product reinforced with polymer additives in powder form with a single component. By applying onto the surfaces from both negative and positive sides, it provides waterproofing. The composed insulation layer has got high mechanical and chemical resistance. It is safely used in damp floors, wet rooms, basements screens, underground structures, swimming pools, water tanks, applications such as concrete, render and screed, ceramic insulations and it provides the ultimate solution.
Fields of Application:
- In waterproofing of horizontal and vertical surfaces from negative and positive sides,
- In waterproofing of concretes, renders and screeds,
- In waterproofing of water tanks and waste water tanks,
- In buildings below the level of sea water,
- In insulation of foundation walls internally or externally,
- In water channels, barrages or dams,
- In insulation of floors and walls of bathroom, kitchen and basement.
Surface Preparation:
The application surfaces must be clean and cleansed from oil, dirt, rust and mud. If there are cracks, hoels, segregations or rud holes on the surface, they should be filled with ISONEM M 03 elastic mortar. If the surface is too corrupted, or there are adherence reducing materials on the surface, ISONEM D 10 super glue should be applied as a primer. The dilatations should be filled with ISONEM A4 elastic mortar beforehand, then the insulation process should be started.
Application Type:
20 kg of ISONEM M 35 is mixed with 6,5 lt of water with the help of a 400 rev drill and tip in a clean container for 5 minutes. The mixing process must be made homogeneously. Prepared mortar is applied on the surface in three layers in the intervals of 4 hours. Among layers, the period should not exceed more than 24 hours. The applications in summer should be made in the morning or in the evening.
Consumption: 2,5 kg/m² (in 3 coats application)
Packaging: 20 kg craft bag
Storage: In a dry and cool place for 12 months
Company Information
5 CONTINENTS, IN NEARLY 100 COUNTRIES,
ISONEM PAINTS AND INSULATION TECHNOLOGIES INC. was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (R & D) team, each of which is specialized in his/her branch at a 7500 m2 closed modern production site landed on an area of 10000 m2 within ITOB Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sound, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.
We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a principle within every stage by using high technology since the beginnings of our organization.
We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.
Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.
As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.
Our Services
USAGE AREAS OF ISONEM PRODUCTS
OUR PRODUCT RANGE COVERS;
-WATERPROOFING MATERIALS
-FLOOR COATINGS
-SPECIAL PAINTS & COATINGS
-INDUSTRIAL CHEMICALS