ISONEM MS POLYMER is a unique, high quality pure polymer produced with latest technology. The product is ready to use, UV resistant, glossy and at hard – elastic film structure, after curing it is open to pedestrian and vehicle traffic and has good resistance to chemicals. Easily applied on terraces, roofs , balconies,wet areas, industrial floors, concrete, screed, render, wooden substrates, metal surfaces, spray polyurethane foam heat insulation material applied surfaces, exterior walls and foundation walls. The product is also used as colored floor coating material on factory, storage, warehouses, parking areas, walkways and on asphalt base. Because of its quick drying time ( 10 minutes initial curing time and 30 minutes fully curing time and 1 hour recoating time for the second layer.) result is easy and quick application. The product is eco friendly because of its low consumption value and low price. It can be applied onto all types of substrates.
Uses:
- Terraces, roofs and balconies
- Wet area and foundation waterproofing
- Factory and warehouse floors
- Parking areas and walkways
- Flat or inclined roofs, terraces
- All kinds of surfaces in bad conditions
- Exterior sides
- Metal roofs and wooden substrates
- Surfaces previously coated with bitumen based waterproofing material
- Asphalt and concrete surfaces
- It is open to pedestrian and vehicle traffic.
- It doesn’t require any additional protective screed or concrete application
It is easily applied on wet or damp surfaces in all weather conditions during summer, winter, quick drying for fast recoating (1 hour) . The product provides color stability, ultraviolet resistance, it has good adhesion and flexibility, it has high mechanical resistance.
APPLICATION:
Substrate must be clean, uniform, dry, free of dust, oil or grease and loose or weak particles . The product is ready to use but stirr well prior to application. Apply with brush, roller or spraying equipment in one or two layer after primer application. Recoating time period is max. 1 hour. Depending on application tools and conditions it can be diluted with water.
Consumption : Primer (by addition of water; %200 ratio) 250 gr/m2
Top coat application without thinning 500 g/m2 per one layer application.
Package: 18 kg plastic pail
Color: All colors available.
Company Information
5 CONTINENTS, IN NEARLY 100 COUNTRIES,
ISONEM CONSTRUCTION CHEMICALS was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (r & d) team, each of which is specialized in his/her branch at a 1500 m2 closed modern production site landed on an area of 2500 m2 within ITOP Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sonic, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.
We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a principle within every stage by using high technology since the beginnings of our organization.
We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.
Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.
As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.